The Tupperware Turd will be back!!
-

TeamTotalWankel - Posts: 2356
- Joined: Tue Jan 29, 2008 2:46 pm
- Location: Barnsley
PPC £999 Challenge: http://www.ppcmag.co.uk/ppc-p999-challenge.html DATE CONFIRMED 7th July @ Santa Pod!
-

owelly - Posts: 6410
- Joined: Thu May 26, 2005 12:02 am
- Location: Whitby. Where the sun always shines.
PPC £999 Challenge: http://www.ppcmag.co.uk/ppc-p999-challenge.html DATE CONFIRMED 7th July @ Santa Pod!
-

owelly - Posts: 6410
- Joined: Thu May 26, 2005 12:02 am
- Location: Whitby. Where the sun always shines.


PPC £999 Challenge: http://www.ppcmag.co.uk/ppc-p999-challenge.html DATE CONFIRMED 7th July @ Santa Pod!
-

owelly - Posts: 6410
- Joined: Thu May 26, 2005 12:02 am
- Location: Whitby. Where the sun always shines.
This a precision piece of engineering...that just happens to be made out of a lampost
-

TeamTotalWankel - Posts: 2356
- Joined: Tue Jan 29, 2008 2:46 pm
- Location: Barnsley
It seems to work with Lego.....



PPC £999 Challenge: http://www.ppcmag.co.uk/ppc-p999-challenge.html DATE CONFIRMED 7th July @ Santa Pod!
-

owelly - Posts: 6410
- Joined: Thu May 26, 2005 12:02 am
- Location: Whitby. Where the sun always shines.
-

TeamTotalWankel - Posts: 2356
- Joined: Tue Jan 29, 2008 2:46 pm
- Location: Barnsley
owelly wrote:Hmmm, I hadn't thought of that Will........ I mean, I've never been much good with technical stuff.
I once explained the idea of PCDs to a guy. Only to find out that he was a mechanical design engineer and the last job he worked on was the track system for the Challenger 2. His own fault really for being sarcastic
-

Renrut - Posts: 4562
- Joined: Wed Sep 06, 2006 12:27 pm
- Location: United Kingdom
"so Owelly, you know about hydraulics?"
"oh, yeah Kev. I do them all the time."
That sarcasm also backfired.....
PPC £999 Challenge: http://www.ppcmag.co.uk/ppc-p999-challenge.html DATE CONFIRMED 7th July @ Santa Pod!
-

owelly - Posts: 6410
- Joined: Thu May 26, 2005 12:02 am
- Location: Whitby. Where the sun always shines.
I splashed a bit of paint around my bits of metal the other day and planned to get the subframe, diff, driveshafts and brakes all assembled this afternoon, then tomorrow, I could 'glass up the big hole under the back of the car and make up the mounts for the new fuel tank. By end of play tomorrow, I wanted the Turd back on its wheels and drivable.
So two hours looking for the long bolts to hold the diff in, then a break as I had to fix SWMBOs A4 and take the kids to the park. As it now gets dark an hour later, I could still be on schedule by morning. Then I spotted a wonky slider pin on one of the calipers. It had been snapped and then brazed back together. So now I need to find a 13.8mm dia slider with a m9 (wtf?) Thread. Or fire up the lathe.
Stay tuned to find out if I've glassed myself to the driveway...
PPC £999 Challenge: http://www.ppcmag.co.uk/ppc-p999-challenge.html DATE CONFIRMED 7th July @ Santa Pod!
-

owelly - Posts: 6410
- Joined: Thu May 26, 2005 12:02 am
- Location: Whitby. Where the sun always shines.
Who is online
Users browsing this forum: No registered users and 1 guest







